Category: Black Rifle Accessories » Muzzle Devices
SOCOM 16/II Kit
Smith Enterprise SOCOM 16/II Kit
Our Price: $279.95 each
This item is currently out of stock.

Now available as a 3 piece system with optional short muzzle brake (P/N 1002-RR). Any of the parts shown can be purchased separately:
 
Gas lock, P/N 2001V-GL, 5/8”x24 with .730” length of thread, made from 1144 fatigue proof steel bar stock. Height of the gas lock dovetail deck allows the use of a standard USGI front sight, SEI NM front sight, or Tritium systems (sights not included). Use of Gas Lock Wrench P/N 2017 is recommended with this kit.
 
Muzzle brake, P/N 1005-SS (SEI sound suppressor capable), with jam nut. Both pieces made from 8620 bar stock steel, black nitrited for a period of time at our SOP heat range for corrosion resistance and extreme surface hardness (the same process used for our M14 barrels and the M2 .50 cal Vortex couplers we make for the U.S. Navy).
 
Muzzle brake, P/N 1002-RR. Shorter brake for those who do not want sound suppression, and it works the same as the longer brake (P/N1001-SS) made from the same material of 8620 and heat treated the same way with the same threads and jam nut.
 
Vortex, P/N 1000V (SEI sound suppressor capable), made from 8620 and case hardened to our spec. This is the same Vortex we supply to Colt Defense. Magnesium phosphate finished to MIL-STD-171. Threaded standard 5/8”x24 with .735” depth of thread. No jam nut or washer needed – the Vortex will self-tighten when weapon is fired. Our P/N 1019 XF-7, aka Crazy Horse grease, can be used for the threads See how this lube resists heat on Youtube.
 
Gas plug P/N 2079 (not included) makes the kit compatible with sound suppressor and standard ammo. 
 
Item Nr.: 440-2001-V-SOCOM
 
INSTALLATION WARNING – PLEASE NOTE
 
After the brake is installed, check to see that there are no bore obstructions or misalignments. The bore, through to the bullet exit hole in the brake, should be concentric. We have no control over how barrels are made, or the bore concentricity to the muzzle threads.
 
If possible, make your visual inspections from the breech end. If you have an AR-type system, be sure to make the visual inspection through the rear of the upper receiver with bolt carrier removed. For all other systems, you may need to inspect from the muzzle end, or try a bore alignment tool.
 
If you are unsure, take the firearm to a competent gunsmith for installation, or call us at 480 964-1818.
 
THE OF USE RELOADS IS NOT RECOMMENDED.
 
WEAR SAFTEY GLASSES – all persons present any shoot activity must wear appropriate safety glasses.

 

Recently Viewed